AudioBahn AS62J El manual del propietario descargar pdf (Pagina 11)

Installation

Once you have tested your system and conrmed that it is operating properly, turn off

your system and prepare for the mounting of the speaker.

1. Position the speaker into the mounting hole and conrm the correct mounting loca-

tion and hole placement. Screw clips are provided to insure a snug t. Place crew

clips over the metal surface and line up the hole with the hole you have previously

drilled. Place the speaker into the hole. Align the mounting holes and proceed to

insert the screws. Be sure to tighten the screws evenly as not to warp the speaker

frame.

2. Turn you system back on to conrm the speakers proper operation. First test at low

volume and then you may steadily increase the volume as desired.

3. The next steps will aid in the proper mounting of the speaker grills. Follow these

steps carefully and be patient. First, locate the special bonding rubber which is

located between the wax paper in the hardware package.

4. Carefully inspect the mounting ring where the grill will be inserted. You will notice 4

to 6 channeled areas. This is the area where the bonding rubber will secure the grill

to the speaker.

5. Break off pieces of the bonding rubber that correspond to the size of the channels

and insert it snugly in place. Once all of the channels have been lled, carefully

insert the grill and press rmly into place.

Securing the Speaker

It is extremely important that the mounting ring is correctly installed around the speaker.

You may notice differences in the inner shape of the grill. These cutouts are so the

bridges holding the tweeters and or mids do not touch. You should be able to see the

bridge unobstructed when the ring is mounted.

Warning

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

AudioBahn AS62J El manual del propietario Pagina 11